Tech Force Contender 59

The Tech Force Contender Model 59 is the big brother to the Model 49. As you can see in the picture below, they are the same length, but the 59 has a slightly different stock and packs more punch that the 49. The stock is thicker as well, which adds more weight to the gun, making it somewhat heavier than its little brother, coming in at 7 lbs. In the picture below, the Model 59 is on the left, and the Model 49 is the right side gun.

I mounted a scope to the Model 59, which comes without any open sights and is made to shoot only with a scope, and began some test firing. I shot several pellets through it to give the gun some small amount of break-in and occasionally shot at a few tin cans nearby. With 7.9 grain Crosman Premier's, penetrating a can is no problem. Even though I didn't get a chance to shoot several hundred pellets through this gun, which is my normal habit to get a feeling for the gun, I did shoot many shots over the chrony. The spread stayed under 12 fps and clocked in at around 100 fps faster than the Model 49.

The muzzlebrake is the same on both models, though the trigger and safety setup are different. On the 49, the safety is at the rear of the tube, and the trigger is plastic. On the 59, the safety is found inside the trigger guard just in front of the trigger, both of which are metal. Cock the gun, load, push the safety forward with the trigger finger, and you are ready to shoot.

The receiver is grooved for the scope, and a scope stop comes pre-installed on the gun. All you have to do is install the scope and scope rings that come in the combination package from Compasseco, and you are ready to shoot.

The fore-end of the stock is cut slightly different on the 59. Here's a pic to show the difference in the two stocks.


With a nice buttpad to finish off the details of the Model 59, this gun offers several nice features that set it above many of the current guns coming from China. It deserves your consideration as a medium-powered springer that comes complete with all the items mentioned above. At the time of this blog posting, it is selling for $125, and don't forget that this is a scope-combo gun. Lots of value in that purchase.

4 Comments:
Randy, what kind of accuracy did you squeeze out of it? How's the firing cycle and the trigger? Looks to be positioned as a poor man's R-7.
By
Steve, At
9:36 PM, December 27, 2007
I picked up a TF59 contender .22 cal. early in December I thought it was well worth the $100 sale price. Started out a little rough but the way it shot made up for that. I have since had it tuned including a gold trigger and added a better quality scope. What a nice gun. It now shoots a 14.3 grain at 620 fps and is a favorite in my collection.
By
Walterd, At
12:49 PM, January 02, 2008
Steve,
I finally was able to get some nice groups at 20 yards with it. I didn't take any pics for some reason....gotta remember to do that in the future....but it certainly has potential, and I'm sure after wearing in, it will only get better.
I was so cold during testing that I'm sure some warmer weather would tighten up my groups just because I wasn't shivering while trying to shoot! Shivering groups were around 1/2" to 3/4", so under better conditions, I'm sure I could do better.
By
Randy Mitchell, At
1:31 PM, January 03, 2008
Walter,
I'm glad your 59 wore in and started doing better for you. That seems to happen with most any spring gun I've shot....the more I shoot it, the better it does for me!
Randy
By
Randy Mitchell, At
1:32 PM, January 03, 2008
Post a Comment
<< Home